Dell PowerConnect 2016 network switch – revisited

From 2004 – 2019 this was our main switch located in the upstairs linen cupboard. When it died I had a go at repairing the power supply but gave up and it was replaced with a Netgear switch. The photo below is was taken in 2019 photo when the switch died.

59394790_10219556656809721_262944829938335744_n
While cleaning up Al’s Workshop came across it again and decided to have have another look – to repair.

Continue reading “Dell PowerConnect 2016 network switch – revisited”

Problem with one of the V380 cameras

Went to move it from the bird bath over to the cottage garden to monitor Speckles and when I plugged the micro USB cable into the camera connector it broke away and is now rattling around inside the camera housing – bugger.

Gave myself no chance of repairing this one!

1
Removed the base and the USB PCB socket dropped out onto the work bench. – the tiny mounting legs have broken off. No photo of the actual socket as it’s too small (bloody tiny) for the phone camera to focus.

Continue reading “Problem with one of the V380 cameras”

Buddha water feature not happy – part 1

The solar pump water outlet flow is like a cyclic spitting?

Had to go up a stepladder which is at the end of a long pole (catch the sun) to remove the solar panel. At the workbench pulled the pump apart and nothing obvious jamming the motor – scratch head.

Continue reading “Buddha water feature not happy – part 1”

Driveway carriage lights not working

Looks like a faulty motion sensor.

Last night I noticed the front lights had come on…and stayed on?
Went out to try resetting the sensor but that was no-go so we have another job to add to the list.

1

This was a 2015 project – the sensor is secured to the top of a upside down plastic Jiffy project box.

 

 

 

 

 

 

 

 

 

 

Continue reading “Driveway carriage lights not working”