In this session we are fitting the reversing camera onto the number plate.
Drill a ‘corner’ pilot hole.
Yeah… out of focus.
The hole is going to end up over 1/2″ so off to get my largest drill set.
That will still need some work with a large rat tail file.
Camera from China… Rego plate from Australia.
Mark and drill holes.
Now do the other side.
With that done we can fit the camera.
Nearly there…
With the camera fitted we can move onto the wiring.
We need to splice camera power wires onto the reversing lamp wires.
With everything floating in the air that’s going to be a fiddly job.
Back soon for Part 3…
