This morning we are making a stand for the Wi-Fi Bird Feeder and I don’t have any preconceived ideas about this job.
Let’s go for a stroll around the workshop and see what we can find.
Collected some stuff including a bamboo pole. Thinking… the PVC pipe sits in the middle and we need a plate to hold it together with a centre hole for the PVC pipe.
Found a nice pine offcut, that hole saw is about 1.5mm undersize so we are going to be doing some rasping.
This is going to take a while.
About 20mins has passed… nearly there.
We need to screw that down.
One leg is a bit smaller so we have to shim that.
With the legs aligned and spirit level spot checks we can screw everything down.
ALDI WorkZone brackets.
Transfer to floor and slide in the bamboo pole.
Enough for this session and I’ll have a think about the height… likely about 5 feet.
