Channel Configuration: 2Ch/1Ch
Line – Low Level Input x 2
Speaker – Hi Level Input x 2
High Level Auto Sensing – Power On/Off
MOSFET Power Supply
Toroidal Transformer
Dual Mode Capable
Output Power
CEA Rating: 60W x 2
DIN 45500 Rating (@ 14 V, THD 0.5 %)
4 ohm: 2 x 55W
4 ohm – BTL: 1 x 130W
2 ohm: 2 x 65W
Rated/THD (@ 14.4 V, 20 Hz – 20 kHz)
4 ohm: 2 x 55W / 0.04%
4 ohm – BTL: 1 x 130W / 0.1%
2 ohm: 2 x 65W / 0.1%
Maximum (@ 14.4 V)
4 ohm: 2 x 110W
4 ohm – BTL: 1 x 350W
2 ohm: 2 x 175W
Input
Low Pass Filter: 80Hz
LPF Roll Off Rate: -18dB/oct
Balanced Input Circuit: Balanced Input Circuit
Input sensitivity: 0.3 – 6Volts
Output
Frequency Response: 5Hz – 50kHz
Tolerance: +0 / -3dB
Signal to Noise Ratio (@ Rated Power): 100dB
Total Harmonic Distortion (@1 kHz): < 0.005%
CEA SN Ratio: 93dBA
Min Load Impedance/Ch: 2ohm
General
Current drain (@ Rated Power – 4Ù): 15Amps
Fuse Rating: 30Amps x 1
Weight (approx.): 2.0kg
Dimensions
(WxHxD in mm) approx: 306 x 55 x 201

This was purchased for a Nissan NX audio upgrade