Category Archives: Projects

DJ 58″ TV visual display unit – part 2

Posted on 11/09/2019 by AlanM52

Completed the second side, that is the right side in 1/3 the time it took to do the first side – the left side. Ready for the next stage of the build each side will have four large holes.

Posted in DJ TV Stand, Projects | Leave a comment

DJ 58″ TV visual display unit – part 1

Posted on 10/09/2019 by AlanM52

After a good start with Philip Tyme on Saturday I am back on this job cos for the last two days got dragged away doing other stuff. Doing some planning before we start. This Torx wood screw is just the right length … Continue reading →

Posted in DJ TV Stand, Projects | Leave a comment

DJ 58″ TV visual display unit – start

Posted on 10/09/2019 by AlanM52

Doing a job for Philip Tyme to make a integrated display TV unit for DJ gigs. For the Bunnings plywood we both had to ring around, see the picture further down the page. Nothing out his way and in my … Continue reading →

Posted in DJ TV Stand, Projects | Leave a comment

Scroll saw stuff – name plaque 3

Posted on 03/05/2019 by AlanM52

With the pattern stuck onto the plywood we can start drilling the pilot holes as described in the previous post.. Off we go..

Posted in Al's Workshop, Projects, Scroll Saw, Srolling, Workshop | Leave a comment

Scroll saw stuff – name plaque 2

Posted on 03/05/2019 by AlanM52

After creating and printing the ‘Al’s Workshop’ pattern we can now stick it onto plywood and start cutting. Cut some plywood on the table saw.

Posted in Al's Workshop, Projects, Scroll Saw, Srolling, Workshop | Leave a comment

Scroll saw stuff – name plaque 1

Posted on 02/05/2019 by AlanM52

Doodling in Word 2013 to create the Word Art text for a scroll saw name plaque. More to come…

Posted in Al's Workshop, Projects, Scroll Saw, Srolling, Workshop | Leave a comment

Samoyed night light – part 10b

Posted on 27/04/2019 by AlanM52

Instructions

Posted in Al's Workshop, Lighting, Night Lights, Srolling | Leave a comment

Samoyed night light – part 4

Posted on 24/04/2019 by AlanM52

Base board frame glue-up is done.

Posted in Projects, Scroll Saw, Srolling, Workshop | Leave a comment

Scroll Saw stuff – silhouette lighting

Posted on 22/04/2019 by AlanM52

FAIL !!!For this one from yesterday why did I stick the LED’s to the base board ??? They need to be hot glued to the back of the subject !!!

Posted in Projects, Scroll Saw, Srolling, Workshop | Leave a comment

Chooks coop heater – some modifications.

Posted on 02/09/2018 by AlanM52

Due to some very cold nights I’ve been swapping between the regular 75W ceramic heat emitter and the larger 250W one. Currently that’s a PIA cos I have to take out 2 screws to remove the top cover – time … Continue reading →

Posted in Chicken Coop Heater, Chickens, Pets, Projects | Leave a comment