Making a start building the box with no planning or sketch drawing. I figure however it turns out it needs a base so let’s jump in without dipping a toe.

Found a scrap of MDF that will just be large enough.

Base dimensions are slightly oversize to the Lenovo tablet.

Cordless ALDI Workzone sliding mitre saw not squared up.

Only need to cut one side and one end.

To continue I need to cut the rest of the panels from a sheet of MDF but wait what do we have here?

Chinese Fir timber from a dog kennel put out last year during hard rubbish collection that I collected 🙂

Those lounge & groove planks will do the job – nicely.

Looks like IKEA flat pack. Cut everything to size, two planks are about 120mm wide. The scanning focal length of the Samsung J7 Pro phone camera is around 100mm so looking good.

I’ll be back…